Class for shipping via UPS
-
We are very proud of our flags! Each flag is made of 13 individual staves cut so that the flag is as proportionate as a round barrel can be. We use colored wood stain so that the wood grain pops through the color. The staves are assembled together, the stars are stenciled on and our polyurethane is applied to finish this amazing piece. Flags measure 35 inches wide by 18 inches tall. There are two heavy-duty hangers on the back of the flag with a heavy-duty wire running between the two hangers for easy hanging. Flags are available in red, white and blue, blue line, red line or a subdued black and white. You also get to pick from an interior or exterior polyurethane finish. -
These pieces are a great conversational piece! They are stave pieces cut on a specific angle to balance a wine bottle with no help just center of gravity of a full wine bottle! Yes, we said full wine bottle! If the bottle is not full, we cannot guarantee the bottle will balance. So, if you open the bottle, you mind as well finish it seeing that you can no longer balance it again! The balancers themselves are made from barrel staves. The staves are cut, stained in a dark walnut color and then have a polyurethane finish. The single balance one bottle, double balance one or two and the triple balance one two or three bottles! Grab one today and try them out yourself! -
These caddies make the perfect wedding, thank you or welcome home gift. The caddie is made from a stave of a barrel. The caddie is set over top of the neck of the wine bottle and two wine glasses balance it on top of the bottle. Two stemmed wine glasses are included with the purchase of a caddie! Throw in your favorite or their favorite bottle of wine and you are good to go! -
The 5 bottle wine rack is uniquely made with staves and hoops from wine barrels! Each rack has two full staves running vertical then small pieces holding them together. The hooks that hold the wine bottles are hoops straightened out, cut to the appropriate length then rolled to hold the wine bottle. This is a perfect piece when you do not have floor space and only a little wall space to store your wine. These pieces are 35 inches tall by 10 inches wide by 8 inches deep. They have two heavy-duty hangers on the back for easy hanging. -
Our wall racks look great on the wall above a half barrel! The wall rack has two shelves to hold your wine bottles with additional staves cut to hold up to 8 stemware. Stained in a dark walnut with a matte polyurethane finish. Holes are drilled into the vertical staves on the back for mounting the unit on the wall. Use heavy duty drywall anchors if you are not going into studs and leave the screws out 1 1/2inche for the wall rack to hang on. The units are 35 inches tall by 24 inches wide by 4-6 inches deep. Sizes vary depending on the staves used. -
Our family name staves are an awesome unique wedding gift! Each stave is dried, stained, stenciled in white or black paint and finished with a matte polyurethane. Hoop pieces are cut and attached to the stave for an added fun detail. There are holes drilled behind the hoop pieces to attach the stave to the wall. These are made by custom order only, orders take 2-4 weeks to complete. -
Candle stave are a perfect addition to the center of a long table or on top of a mantel. Each stave is dried and then four holes are drilled into the stave. It is then stained and coated with a matte polyurethane. The four votive candles fit perfectly into the predrilled spots. Four glass votive and four candles are included with the purchase. Our Advent Candle Stave is perfect for the Christmas season. The advent stave option has 5 holes drilled into the stave in which 5 glass votives fit. Three purple, one pink and one white candle are included with the advent candle staves -
These wall racks look great placed on the wall above a half barrel. They offer more shelf space to showcase some of your "top shelf" beverages. You do not have to display beverages on them though, others have used them to showcase their drinking glass collection and their shot glass collection. These racks resemble the shape of a barrel being 25 inches wide 35 inches tall and vary slightly in the depth from 4-5 inches. Like all our products the unit is stained in a dark walnut color and finished with two coats of a matte polyurethane. Two holes have been drilled into the vertical stave on the back of the rack for mounting. We suggest using heavy-duty dry wall anchors rated for 50+ lbs. Use long screw and drill into the anchor leaving 1.5 inches out for the wall rack to hang from. -
Each bottle opener is on a portion of a finished stave. Staves are the individual pieces of wood that form the barrel. The staves have been dried, cleaned up, stained and sealed with a matte finish polyurethane. The stave also has been predrilled with a countersunk hole behind the bottle opener for easy mounting of the bottle opener.
Mounting a Wall Mounted Bottle Opener- Unscrew the bottle opener from the stave piece
- Screw through hole in stave piece into the wall or cabinet
- Replace the bottle opener and screw it back into place over top of the screw going into the wall
Our hand-held bottle openers are also a great gift to throw in with a case of beer. Grab one for your boat, keep one in your cooler or to have on hand in your barn. One should never be without a bottle opener!
Grab a beer and enjoy! Cheers! -
Have a bar or bourbon room, do you have a clock near the area? No!? Well then, these clocks made from bourbon barrels are calling your name! Stave clocks are made from multiple staves assembled together with hoop pieces added for additional character. The wood and metal hoops provide a perfect mixed media look! Sizes of the clocks can vary slightly depending on the stave widths but on average are around 12 inches wide by 16 inches tall. These are stained in dark walnut and sealed with two coats of matte polyurethane. Hands and movements are made in the USA and are attached to the clock to complete the piece. Clock movements run on an AA battery included with purchase. A heavy-duty hanger is also attached to back of clock for easy hanging.
-
Who wouldn't want a clock made from a whiskey or wine barrel. The wood provides so much character with all the wood grain that is exposed when we finish our products! Our stenciled clocks are plain heads from wine or whiskey barrels with numbers or sayings painted on them. The heads are stained in dark walnut, the details are stenciled on with black paint and then finished with a matte polyurethane. Movements that are made in the USA are then added to the clock to finish this stunning piece! The whiskey barrel heads measure 21.5 inches in diameter and the wine barrel heads vary from 22-24 inches in diameter. -
Do you like the head trays but would like something added to it? We love to add fun images and phrases to these pieces. Images and phrases vary and can be custom designed as well. The trays are made from the heads of the barrels that measure 22 inches in diameter. The individual pieces are affixed together, sanded, stained, stenciled and sealed. Handles are added to the tray for easy carrying. All products used are food safe. For cleaning use a damp rag and towel to dry off, do not submerge piece into water, and it is not dishwasher safe. -
If you love the look of our large charcuterie boards but do not have the room for one, these small charcuterie boards are just for you! These again are made from the wine barrels and the color is from the wine in the barrel. The undersides are colored in dark walnut stain and sealed with polyurethane. The top side has three coats of polyurethane and sealed tight. The products we use are food grade products so you can place foods directly on the board. I love these little boards for serving crackers and a dip or chips and salsa and these again make beautiful seasonal décor pieces.
-
Aren't these gorgeous! We make these charcuterie boards from the wine barrels we get. The red color on top is actually from the wine that is in the barrels, therefore the color on these boards do tend to vary. The underside is stained in a dark walnut color with a matte finish polyurethane. The tops are treated with three coats of polyurethane to ensure they are sealed well. The polyurethane is food grade, and you can place your meats and cheese directly on the board. Take a damp cloth to wipe clean afterwards. Don't have a place to store them, don't leave them out! These pieces make gorgeous centerpieces on a table with seasonal decor on them! Sorry meats, cheeses and decorations are not included with the boards;)
-
Our full barrel bars are going to provide quite the wow factor! We collect our barrels from local breweries and would love it if we could find out the history of every barrel. Unfortunately, the barrels cannot talk and inform us of where they have been, we just get to enjoy the character that each barrel provides. Our plane full barrel bars do not have trademarks or logos on them. All of our full barrel bars have a shelf in the middle of the barrel made of solid oak and are on a rotary! There are two doors that on the front with a rustic latch to allow doors to be open or closed. We also flip the bottom head of the barrel to present wood instead of the char from the inside of the barrel. Our barrels are stained in a dark walnut color and then have a matte polyurethane finish. Looking to add a little height to the barrel? Add some of our heavy-duty black hairpin legs! These legs have been handmade right in Zeeland, Michigan. They are made from 1/2 in steal and powder coated in a satin black finish. These legs do come separately from the barrel and will need to be assembled to the barrel when purchase is made. Holes will be predrilled into the barrel and screws will be provided. Some tools will be required for assembly. -
This is where Leisure Time Designs began! Tara fell in love with this design and Ed had fun building it. We toyed with the idea of making more items out of barrels and we are so happy we pursued this idea! The half barrel provides you the character of a full barrel, but it does not take up the floor space of a full barrel. This half barrel holds around 25-30 bottles of wine. We love using every part of the barrel and have even trimmed down staves to use as the shelve to hold the wine bottles. The piece is stained in a dark walnut color and finished in a matte polyurethane. Perfect touch to display your wine collection! Looking to add a little height to the barrel? Add some of our heavy-duty black hairpin legs! These legs have been handmade right in Zeeland, Michigan. They are made from 1/2 in steal and powder coated in a satin black finish. These legs do come separately from the barrel and will need to be assembled to the barrel when purchase is made. Holes will be predrilled into the barrel and screws will be provided. Some tools will be required for assembly. -
Our half barrels are a very popular item! Most people love the character an old whiskey barrel can provide however not many people have the room for a full barrel. These half barrels provide the character of a barrel however they only take up half as much room! These can be pushed flush up to the wall, stand about 3 feet tall, are right around 2 feet wide and stick out 1 foot from the wall. They can still hold a large amount of beverage choices! We add a solid oak shelf in the middle of the barrel and also flip the bottom head so wood is being presented instead of char. The barrels are sanded, stained in a dark walnut color and then finished with two coats of a matte finish polyurethane. Looking to add a little height to the barrel? Add some of our heavy-duty black hairpin legs! These legs have been handmade right in Zeeland, Michigan. They are made from 1/2 inch steal and powder coated in a black finish. These legs do come separately from the barrel and will need to be assembled to the barrel when purchase is made. Holes for the legs will be predrilled into the barrel and screws will be provided. Some tools will be required for assembly. -
The half barrel with doors is one of our most popular products. These half barrels provide the character of a full barrel however, they only take up half as much room. These can be pushed flush up to the wall, stand about 3 feet tall, are right around 2 feet wide and stick out 1 foot from the wall. As you can see in the picture, they can still hold a large amount of beverage choices! The doors provide the option of showing off what you have or hiding your stash by closing the doors. We use a solid oak piece for the shelf and also flip the bottom head so there is wood being presented on the bottom instead of the char. The barrels are sanded, stained in a dark walnut color and then finished with two coats of a matte finish polyurethane. Looking to add a little height to the barrel? Add some of our heavy-duty black hairpin legs! These legs have been handmade right in Zeeland, Michigan. They are made from 1/2-inch steal and powder coated in a black finish. These legs do come separately from the barrel and will need to be assembled to the barrel when purchase is made. Holes will be predrilled, and screws will be provided. Some tools will be required for assembly. -
These barrel stave pieces are a great gift for the man who loves to grill or smoke! Soak some of these stave pieces in water and throw them in with your charcoal grill for an amazing caramel flavored touch. These bags are great to give as a Father's Day gifts, have a few bags at your cottage for those weekends spent sitting around and smoking meat, we have even had people purchase bags to soak in their homemade wines. These stave pieces have not been touched by any sort of finish. They come from whiskey barrels that have been used by breweries. Each bag weighs 4lbs. Grab yours today and add an amazing touch to your steak next time you grill. -
Check out these unique whiskey barrel signs! Each sign is made from an individual whiskey barrel stave. The staves are sanded and cleaned up then the backs get a coat of clear coat to preserve the character of the charred barrel. The front of the sign is stained in a dark walnut color, then stenciled with white paint. Two coats of a matte finish polyurethane are applied to seal the sign. Eye screws are attached, and a piece of twine is added to hang your piece. Width of stave vary by 1-2 inches. -
All of our barrels that have trademarks or logos on them are authentic! We would not and will not replicate any distillery logo. These full barrel cabinets have a hardwood shelf in the middle of the barrel to hold many of your favorite drink choices. The shelf is even on a rotary, so you do not have to remove bottles from the front just to get the bottle in the back. The bottom head is flipped so the wood is exposed and not the char. Lighting is an easy option to add with the bung hole out the back and an additional hole we drill out the bottom of the barrel. Lights are not included. Two doors in the front of the barrel bar close to complete the beautiful piece with a rustic black latch. The barrels are stained in a dark walnut color and have an interior matte or exterior polyurethane finish. Looking to add a little height to the barrel? Add some of our heavy-duty black hairpin feet! These feet have been handmade right in Zeeland, Michigan. They are made from 1/2 in steal and powder coated in a satin black finish. These legs do come separately from the barrel and will need to be assembled to the barrel when purchase is made.
-
We love seeing the reaction of people who stop by and read our signs. So many laughs! If you are looking for some wall decor in or near your bar area these signs are just what you need! The signs are made from multiple staves affixed together. They get sanded, stained, stenciled and varnished. Two eye screws are added to the top of the sign and a piece of twine is added for hanging. Many fun sayings to pick from! These make great gifts especially for those hard to shop for guys! Sign dimensions do vary slightly due to the stave widths used to make the signs but are right around 7 inches by 14 inches. Add 3 inches to figure in dimensions when hung from the twine hanger. -
Our decorative hooks are the perfect touch to an entryway, bathroom, garage or anywhere you would like to hang items. The hooks are great for holding coats, towels, dog leashes or any item. The hooks are attached to a piece of finished barrel stave. The staves are stained in a dark walnut color and then finished with a matte polyurethane. Each stave piece is predrilled with a hole for mounting the hook on the wall. To mount your hook on the wall:- Unscrew the hook from the stave piece
- Place the stave piece on your wall where you would like it
- Screw through the hole that is predrilled into the stave
- Replace the hook on the stave piece and screw into place covering up the screw holding the stave against the wall
-
These signs are a perfect touch to any wall! These mixed media pieces provide a great rustic and clean lined wall decoration. The metal barrel hoop complements the wood staves running through the hoop. The stave pieces are finished with a dark walnut stain, stenciled with a white paint and then finished with matte polyurethane. The circular dimension of these pieces is great contrast from typical square and rectangular wall art. -
Bourbon: Happy Water for Fun People This is our number one seller sign here at Leisure Time Desings LLC. Do you enjoy your bourbon or know someone who does, then this sign is perfect for you! We cannot keep track of how many times we hear that there is not enough bourbon specific items out there. This sign is made from two bourbon barrel staves. The staves are sanded, stained in a dark walnut color, stenciled in white paint and then finished with a matte polyurethane. The staves are attached to each other with eye screws and twine. Hang the sign from the twine hanger above your bar or bourbon collection today! -
Whiskey Probably Won't Solve Your Problems But It's Worth a Shot Have a wall in your bar area that needs some decorating? This sign is our biggest sign being three full length whiskey barrel staves all affixed together by twine. Each stave is sanded, stained in a dark walnut color, stenciled in white paint and finished with a matte polyurethane. It measures 35 inches across by 20 inches tall including the twine hanger. -
How cute would this bench be by your front door with seasonal decor around it and a cute pillow? Or what about just inside your door to sit on and take shoes on and off? This bench is made completely from whiskey or wine barrel staves. The wine barrel benches have a red seat which is stained from the red wine that was in the barrel. The whiskey barrel benches have the black charred top. No worries on getting char on your bottom, we sand majority of the char off and then seal it with three coats of polyurethane. We stain the bench with a dark walnut colored stain. The interior finished polyurethane has a matte finish, and the exterior polyurethane has a glossy finish. Total measurements do vary slightly according to the staves used from the barrels. Approximate measurements are 35 inches long by 19 inches tall and 12 inches wide. -
Check out these great checkers/chess boards! These are made from the heads of whiskey barrels. The heads are assembled together and sanded smooth to the touch. They then get stained in a dark walnut color, stenciled with black paint and finished with a matte varnish. The bottom of the board has a lazy susan attached to it for easy viewing of the whole board. Who wouldn't want to sit outside on your deck, porch, or by a fire and play a nice game of chess or checkers to finish off the day. -
These end table are perfect to use as a plant stand or put a lamp on them in a dark corner. These tables are made from whiskey barrel heads and black metal hairpin legs are attached to the bottom of it to give it some height. The heads are assembled together, sanded, stained in a dark walnut color, and finished with matte polyurethane. These end tables stand 18 inches tall when assembled. Legs are package with the tabletop and some assembly is required. Holes will be predrilled, and screws are provided to attach the legs to the head, some tools will be required. Rubber feet are also included to place under the legs to prevent any sliding on hardwood or tile surfaces. -
There are so many uses for these half barrel flower planters! We have a few in our landscaping and they are a great focal point! These barrels are not sanded, stained or varnished. We do however, screw the hoops into the stave to prevent the hoops from falling off if the barrel dries out. These pieces provide great petina to any flower garden or landscape. -
Coffee bars are quite the thing right now and we have your storage for your coffee cups covered. These coffee bar staves are a full stave, 35 inches long, with 6 mini black hooks on them. We have added some hoop pieces to the top and the bottom of the stave for some fun additional decoration, but they also provide a hiding spot for mounting the stave onto the wall. To mount these staves on the wall there are heavy duty hooks on the back of the stave, or unscrew the hoop pieces and drill through the predrilled holes into your wall for a sturdy tight fit against the wall. The stave has been sanded stained in a dark walnut color and then finished with a matte polyurethane. You get to choose between a vertical or horizontal coffee bar stave. Fun tip these staves look absolutely stunning with copper Moscow Mule cups on them too! -
These beautiful crosses are made from repurposed whiskey barrels. Our small crosses measure 8 inches wide by 12 inches tall. Once the stave pieces are cut and sanded they get a dark walnut stain applied. We then finish the pieces with multiple coats of matte polyurethane. The backs of the crosses are clear coated to keep the char character but minimize the mess it leaves. The two individual staves are affixed with heavy duty screws and then twine is tied around the cross to add the perfect finishing touch. We also place a hanger on the back for easy hanging on your wall. These crosses make perfect gifts for any occasion! -
These beautiful crosses are made from repurposed whiskey barrels. The wood from these barrels provide gorgeous wood grain and make beautiful, finished product. Our medium sized crosses measure 18 inches tall by 12.5 inches wide and 2 inches deep. Once the stave pieces are cut and sanded they get a dark walnut stain applied. We then finish the pieces with multiple coats of matte polyurethane. The backs of the crosses are clear coated to keep the char character but minimize the mess it leaves. The two individual staves are affixed with heavy duty screws and then twine is tied around the cross to add the perfect finishing touch. We also place a hanger on the back for easy hanging on your wall. These crosses make great gifts for any occasion! -
These beautiful crosses are made from repurposed whiskey barrel staves. The wood from these barrels provides gorgeous wood grain and makes for a beautiful, finished product. These crosses measure 35 inches tall by 24.5 inches wide and 4 inches deep. Once the stave pieces are cut and sanded, they get a dark walnut stain applied. We then finish the pieces with multiple coats of matte polyurethane. The backs of the crosses are clear coated to keep the char character but minimize the mess it leaves. The two individual staves are affixed with heavy duty screws and then twine is tied around the small, medium and large crosses to add the perfect finishing touch. Large crosses with hoops have small hoop pieces from the barrel added for accents on the cross. We also place a hanger on the back for easy hanging on your wall. These crosses make great gifts for any occasion! -
Our crosses bring a beautiful touch to any room. This cross is placed inside a barrel hoop for a fun mixed media piece. The cross is made from staves from barrels which are stained in a dark walnut color, and sealed with a matte polyurethane. Once the crosses are assembled they are placed inside the barrel hoop. Measurements on this piece are right around 22 inches in diameter and 2 inches deep. As soon as this item was created we had to get one up on our walls! This is definitely a piece that will not disappoint. -
If you are looking for a statement piece this is it!!! This half barrel bar includes one of our half barrel cabinets with doors and a solid oak shelf to provide a great source of storage. The half barrel has 6 inch hairpin legs attached to the bottom of the barrel, handmade right here in Michigan. The top is a beautiful semicircle piece of granite. We have a few pieces of granite readily available or you can get different pieces if you are going for a different look. The top is 1 1/2 inches thick and is 32 inches in diameter. The bars total height measures 43 inches tall. Add some of our barrel barstools on either side and you have a perfect hang out spot! Some assembly is required if shipped. The holes will be predrilled into the barrel, to affix the granite top and the hairpin legs. Screws will be provided; some tools will be required to assemble. This product is made to order, please allow two to four weeks to make product. -
Check out this awesome fire barrel! This is a perfect touch to your back yard barbeque, patio, or deck. This sets a great mood for any gathering! The barrel is finished with our dark walnut colored stain and our exterior polyurethane. The doors make the perfect opening for a 20 pound propane tank. This fire barrel includes the barrel, fire ring, hoses that connects to the propane tank, a key to adjust the fire, fire stones (color may vary from pictures), a glass surround, and an outdoor cover to protect the barrel when not in use. The propane tank is not included. This fire barrel is made to order. Please allow a minimum of two weeks to process order.